Product Description
Details
Marlcoat High Opacity External Masonry Coatings
Ideal for use on all masonry type surfaces including, brick, stone, ruffcast and rendered concrete
Size: 20 Litres
Application: airless spray, conventional spray, brush or roller - 2 coats recommended
Drying Time:
Touch dry 3-4 hours at 20°C
Recoat after 3-4 hours
Technical Data:
Volume solids 48% DFT 40 microns in one coat and can be built up to 120/160 microns in 3 coats
Coverage:
20 Litres covers 150 sq metres/litres (dependent on the kind of surface being painted and should be used as a guide only)
Standard Colour Range:
Beige
Black
Brick Red
Cream
Grey
Off White
Sandstone
White
An extensive choice of colours available from the RAL/B.S range.
General Info:
Marl Coatings' high opacity external masonry coatings are idealy suited for use on most dry masonry surfaces including rendering, roughcast, pebbledash, concrete, building blocks, breeze blocks, facing bricks, emulsion or masonry painted surfaces.
Common fletton type bricks would be regarded as unsuitable.
Before application, dusty or flaking areas should be treated by brushing with a hard wire brush then seal with stabilising solution. This product contains a fungicide to help protect against the damaging effect of mould growths on its surface film
If you don't see what you need on this site please feel free to contact us on 0151 427 6447 and one of our dedicated sales advisers will be more than happy to help you.
