Metal Cladding Paints

Marlcoat Metal Cladding Paints for Farm Sheds & Barns
Metal or structural steel agricultural buildings and barns.

Application:
Stir well. Easy to apply by brush or roller. If more than one can of a colour is to be used in the same
area, intermix before use

Size: 5 Litres, 20 Litres & 205 Litres

Drying Time:
Touch dry 3-6 hours at 15°C
Over coating minimum 12-24 hours

Technical Data:
Volume solids 48.9% D.F.T 25 microns (1 coat)

High VOC Content 25-50% VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product (Cat A/d): 400 g/l (2007)/300 g/l (2010).
This product contains max 300 g/l VOC.

Coverage:
Theoretical spread rate 13/17 sq metres/litres (depending on the porosity and age of the surface being coated)

Standard Colour Range:
Black, Dove Grey, Dutch Blue, Emerald Green, Red Oxide, Slate Grey

An extensive choice of colours available from the RAL/B.S range.

General Info:
Marl Coatings' metal cladding paints for farm sheds & barns is a heavy duty, solvent-borne protective finish coating formulated for interior and exterior use.

With excellent covering properties, the key advantages of this product are that it delivers an attractive semi-gloss finish that combines excellent opacity with outstanding durability making it highly resistant to inclement weather.

It is ideally suited for the long term protection of metal or structural steel agricultural buildings and barns.

Preparation:

• All surfaces to be painted should be clean, dry and free from loose and flaking material
• When painting iron and steel, remove all mill scale and rust
• Prime bare surfaces with the appropriate primer
• Rub down previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly
• Wear a suitable face mask when dry sanding
• Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Cleaning:

• Remove as much product as possible from the equipment used to apply the coating before cleaning
• Replace lid firmly
• Clean equipment immediately after use with white spirit or paint cleaner
• Some local authorities have special facilities for the disposal of waste coatings
• Do not empty product into drains or watercourses.

Precautions

• This paint product is flammable
• Contains Cobalt Carboxylate and Ethyl Methyl Ketoxime
• May produce an allergic reaction. Keep away from sources of ignition
• No smoking
• Repeated exposure may cause skin dryness or cracking
• Ensure maximum ventilation during application and drying
• Avoid contact with skin and eyes
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
• After contact with skin, wash immediately with plenty of soap and water or a recognised skin cleaner
• Do not use solvent or thinners
• Restrict interior use to small surface areas. Not recommended for interior use on large surface areas in confined spaces
• If swallowed, seek medical advice immediately and show the container or label
• Keep out of the reach of children 

For further advice contact Technical Advisory 0151 427 6447.